Event Detail

Welcome To Educskill

CCNP Routing & Switching Training

CCNP Routing & Switching Training
ccna training in noida 4 out of 5 based on 62 ratings. 35 user reviews.

Rexton IT Solutions is the name you can trust on when comes to do the training course in CCNP Routing & Switching. 

The center is situated in Noida and considered as the best training provider who offers best CCNP training. The Cisco Certified Network Professional (CCNP) Routing and Switching certification course is required by the students for validating the ability to implement, plan, troubleshoot and verify both the enterprise and local networks. For this, one has to work collaboratively with the experts on different sectors like voice, security, wireless and video solutions. This course has opened various doors of opportunities to experience the networking. By learning the skills, one can easily get the networking experience and place themselves in the topmost organizations. You can play the role of network engineering, support engineering, systems engineering or network technicians. It is a long-lasting foundation who wants to make their career in the IT industry.
At Rexton IT Solutions, you can apply for the CCNP Routing and Switching certification program to discover the fundamentals of network engineering and enhances the knowledge of the same. This is the only place who guarantee the 100% job satisfaction if you possess the talent or capability to apply the knowledge.

curriculum

Course content
 
EXAM-1 Implementing Cisco IP Routing [300-101]
    
        1.0 Network Principles
  • 1.1- Identify Cisco Express Forwarding concepts
    1.1.a    Adjacency table
  • 1.2- Explain general network challenges
    1.2.a    Unicast
    1.2.b    Out-of-order packets
    1.2.c    Asymmetric routing
  • 1.3- Describe IP operations
    1.3.a    ICMP Unreachable and Redirects
    1.3.b    IPv4 and IPv6 fragmentation
    1.3.c    TTL
  • 1.4- Explain TCP operations
    1.4.a    IPv4 and IPv6 (P)MTU
    1.4.b    MSS
    1.4.c    Latency
    1.4.d    Windowing
    1.4.e    Bandwidth-delay product
    1.4.f    Global synchronization
  • 1.5- Describe UDP operations
    1.5.a    Starvation
    1.5.b    Latency
  • 1.6- Recognize proposed changes to the network
    1.6.a    Changes to routing protocol parameters
    1.6.b    Migrate parts of the network to IPv6
    1.6.c    Routing protocol migration

    2.0 Layer 2 Technologies
  • 2.1- Configure and verify PPP
    2.1.a    Authentication (PAP, CHAP)
    2.1.b    PPPoE (client side only)
  • 2.2- Explain Frame Relay
    2.2.a    Operations
    2.2.b    Point-to-point
    2.2.c    Multipoint

    3.0 Layer 3 Technologies
  • 3.1- Identify, configure, and verify IPv4 addressing and subnetting
    3.1.a    Address types (Unicast, broadcast, multicast, and VLSM)
    3.1.b    ARP
    3.1.c    DHCP relay and server
    3.1.d    DHCP protocol operations
  • 3.2- Identify IPv6 addressing and subnetting
    3.2.a    Unicast
    3.2.b    EUI-64
    3.2.c    ND, RS/RA
    3.2.d    Autoconfig (SLAAC)
    3.2.e    DHCP relay and server
    3.2.f     DHCP protocol operations
  • 3.3- Configure and verify static routing
  • 3.4- Configure and verify default routing
  • 3.5- Evaluate routing protocol types
  • 3.5.a    Distance vector
    3.5.b    Link state
    3.5.c    Path vector
  • 3.6- Describe administrative distance
  • 3.7- Troubleshoot passive interfaces
  • 3.8- Configure and verify VRF lite
  • 3.9- Configure and verify filtering with any protocol
  • 3.10- Configure and verify redistribution between any routing protocols or routing sources
  • 3.11- Configure and verify manual and autosummarization with any routing protocol
  • 3.12- Configure and verify policy-based routing
  • 3.13- Identify suboptimal routing
  • 3.14- Explain ROUTE maps
  • 3.15- Configure and verify loop prevention mechanisms
    3.15.a  Route tagging and filtering
    3.15.b  Split-horizon
    3.15.c  Route poisoning
  • 3.16- Configure and verify RIPv2
  • 3.17- Describe RIPng
  • 3.18- Describe EIGRP packet types
  • 3.19- Configure and verify EIGRP neighbor relationship and authentication
  • 3.20- Configure and verify EIGRP stubs
  • 3.21- Configure and verify EIGRP load balancing
    3.21.a  Equal cost
    3.21.b  Unequal cost
  • 3.22- Describe and optimize EIGRP metrics
  • 3.23- Configure and verify EIGRP for IPv6
  • 3.24- Describe OSPF packet types
  • 3.25- Configure and verify OSPF neighbor relationship and authentication
  • 3.26- Configure and verify network types, area types, and router types
    3.26.a  Point-to-point, multipoint, broadcast, nonbroadcast
    3.26.b  LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
    3.26.c  Internal router, backbone router, ABR, ASBR
    3.26.d  Virtual link
  • 3.27- Configure and verify OSPF path preference
  • 3.28- Configure and verify OSPF operations
  • 3.29- Configure and verify OSPF for IPv6 
  • 3.30- Describe, configure, and verify BGP peer relationships and authentication
    3.30.a Peer group
    3.30.b Active, passive
    3.30.c States and timers
  • 3.31- Configure and verify eBGP (IPv4 and IPv6 address families)
    3.31.a eBGP
    3.31.b 4-byte AS number
    3.31.c Private AS
    3.32- Explain BGP attributes and best-path selection

    4.0 VPN Technologies

  • 4.1- Configure and verify GRE
  • 4.2- Describe DMVPN (single hub)
  • 4.3- Describe Easy Virtual Networking (EVN)

    5.0 Infrastructure Security

  • 5.1- Describe IOS AAA using local database
  • 5.2- Describe device security using IOS AAA with TACACS+ and RADIUS
    5.2.a    AAA with TACACS+ and RADIUS
    5.2.b    Local privilege authorization fallback
  • 5.3- Configure and verify device access control
    5.3.a    Lines (VTY, AUX, console)
    5.3.b    Management plane protection
    5.3.c    Password encryption
  • 5.4- Configure and verify router security features
    5.4.a    IPv4 access control lists (standard, extended, time-based)
    5.4.b    IPv6 traffic filter
    5.4.c    Unicast reverse path forwarding

    6.0 Infrastructure Services
  • 6.1- Configure and verify device management
    6.1.a    Console and VTY
    6.1.b    Telnet, HTTP, HTTPS, SSH, SCP
    6.1.c    FTP
  • 6.2- Configure and verify SNMP
    6.2.a    v2
    6.2.b    v3
  • 6.3- Configure and verify logging
    6.3.a    Local logging, syslog, debugs, conditional debugs
    6.3.b    Timestamps
  • 6.4- Configure and verify Network Time Protocol (NTP)
    6.4.a    NTP master, client, version 3, version 4
    6.4.b    NTP authentication
  • 6.5- Configure and verify IPv4 and IPv6 DHCP
    6.5.a    DHCP client, IOS DHCP server, DHCP relay
    6.5.b    DHCP options (describe)
  • 6.6- Configure and verify IPv4 Network Address Translation (NAT)
    6.6.a    Static NAT, dynamic NAT, PAT
  • 6.7- Describe IPv6 NAT
    6.7.a    NAT64
    6.7.b    NPTv6
  • 6.8- Describe SLA architecture
  • 6.9- Configure and verify IP SLA
    6.9.a    ICMP
  • 6.10- Configure and verify tracking objects
    6.10.a  Tracking objects
    6.10.b  Tracking different entities (for example, interfaces, IPSLA results)
  • 6.11- Configure and verify Cisco NetFlow
    6.11.a  NetFlow v5, v9
    6.11.b  Local retrieval
    6.11.c  Export (configuration only)
 

 
EXAM-2 Implementing Cisco IP Switched Networks [SWITCH 300-115]

1.0 Layer 2 Technologies

  • 1.1- Configure and verify switch administration
    1.1.a    SDM templates
    1.1.b    Managing MAC address table
    1.1.c    Troubleshoot Err-disable recovery
  • 1.2- Configure and verify Layer 2 protocols
    1.2.a    CDP, LLDP
    1.2.b    UDLD
  • 1.3- Configure and verify VLANs
    1.3.a    Access ports
    1.3.b    VLAN database
    1.3.c    Normal, extended VLAN, voice VLAN
  • 1.4- Configure and verify trunking
    1.4.a    VTPv1, VTPv2, VTPv3, VTP pruning
    1.4.b    dot1Q
    1.4.c    Native VLAN
    1.4.d    Manual pruning
  • 1.5- Configure and verify EtherChannels
    1.5.a    LACP, PAgP, manual
    1.5.b    Layer 2, Layer 3
    1.5.c    Load balancing
    1.5.d    EtherChannel misconfiguration guard
  • 1.6- Configure and verify spanning tree
    1.6.a    PVST+, RPVST+, MST
    1.6.b    Switch priority, port priority, path cost, STP timers
    1.6.c    PortFast, BPDUguard, BPDUfilter
    1.6.d    Loopguard and Rootguard
  • 1.7- Configure and verify other LAN switching technologies
    1.7.a    SPAN, RSPAN
  • 1.8- Describe chassis virtualization and aggregation technologies
    1.8.a    Stackwise

    2.0 Infrastructure Security
  • 2.1- Configure and verify switch security features
    2.1.a    DHCP snooping
    2.1.b    IP Source Guard
    2.1.c    Dynamic ARP inspection
    2.1.d    Port security
    2.1.e    Private VLAN
    2.1.f     Storm control
  • 2.2 Describe device security using Cisco IOS AAA with TACACS+ and RADIUS
    2.2.a    AAA with TACACS+ and RADIUS
    2.2.b    Local privilege authorization fallback

    3.0 Infrastructure Services
  • 3.1 Configure and verify first-hop redundancy protocols
    3.1.a    HSRP
    3.1.b    VRRP
    3.1.c    GLBP
 

 
EXAM-3 Troubleshooting and Maintaining Cisco IP Networks v2 [300-135]
     
      1.0 Network Principles  
  • 1.1- Use Cisco IOS troubleshooting tools
    1.1.a    Debug, conditional debug
    1.1.b    Ping and trace route with extended options
  • 1.2 -Apply troubleshooting methodologies
    1.2.a    Diagnose the root cause of networking issues (analyze symptoms, identify and describe   root cause)
    1.2.b    Design and implement valid solutions
    1.2.c    Verify and monitor resolution

    2.0 Layer 2 Technologies
  • 2.1- Troubleshoot switch administration
    2.1.a    SDM templates
    2.1.b    Managing MAC address table
    2.1.c    Troubleshoot Err-disable recovery
  • 2.2- Troubleshoot Layer 2 protocols
    2.2.a    CDP, LLDP
    2.2.b    UDLD
  • 2.3 Troubleshoot VLANs
    2.3.a    Access ports
    2.3.b    VLAN database
    2.3.c    Normal, extended VLAN, voice VLAN
  • 2.4 Troubleshoot trunking
    2.4.a    VTPv1, VTPv2, VTPv3, VTP pruning
    2.4.b    dot1Q
    2.4.c    Native VLAN
    2.4.d    Manual pruning
  • 2.5 Troubleshoot EtherChannels
    2.5.a    LACP, PAgP, manual
    2.5.b    Layer 2, Layer 3
    2.5.c    Load balancing
    2.5.d    EtherChannel misconfiguration guard
  • 2.6 Troubleshoot spanning tree
    2.6.a    PVST+, RPVST +, MST
    2.6.b    Switch priority, port priority, path cost, STP timers
    2.6.c    PortFast, BPDUguard, BPDUfilter
    2.6.d    Loopguard, Rootguard
  • 2.7 Troubleshoot other LAN switching technologies
    2.7.a    SPAN, RSPAN
  • 2.8 Troubleshoot chassis virtualization and aggregation technologies
    2.8.a Stackwise

    3.0 Layer 3 Technologies
  • 3.1 Troubleshoot IPv4 addressing and subnetting
    3.1.a    Address types (Unicast, broadcast, multicast, and VLSM)
    3.1.b    ARP
    3.1.c    DHCP relay and server
    3.1.d    DHCP protocol operations
  • 3.2 Troubleshoot IPv6 addressing and subnetting
    3.2.a    Unicast
    3.2.b    EUI-64
    3.2.c    ND, RS/RA
    3.2.d    Autoconfig (SLAAC)
    3.2.e    DHCP relay and server
    3.2.f     DHCP protocol operations
  • 3.3 Troubleshoot static routing
  • 3.4 Troubleshoot default routing
  • 3.5 Troubleshoot administrative distance
  • 3.6 Troubleshoot passive interfaces
  • 3.7 Troubleshoot VRF lite
  • 3.8 Troubleshoot filtering with any protocol
  • 3.9 Troubleshoot between any routing protocols or routing sources
  • 3.10 Troubleshoot manual and autosummarization with any routing protocol
  • 3.11 Troubleshoot policy-based routing
  • 3.12 Troubleshoot suboptimal routing
  • 3.13 Troubleshoot loop prevention mechanisms
    3.13.a  Route tagging, filtering
    3.13.b  Split-horizon
    3.13.c  Route poisoning
  • 3.14 Troubleshoot RIPv2
  • 3.15 Troubleshoot EIGRP neighbor relationship and authentication
  • 3.16 Troubleshoot loop free path selection
    3.16.a  RD, FD, FC, successor, feasible successor
  • 3.17 Troubleshoot EIGPR operations
    3.17.a  Stuck in active
  • 3.18 Troubleshoot EIGRP stubs
  • 3.19 Troubleshoot EIGRP load balancing
    3.19.a  Equal cost
    3.19.b  Unequal cost
  • 3.20 Troubleshoot EIGRP metrics
  • 3.21 Troubleshoot EIGRP for IPv6
  • 3.22 Troubleshoot OSPF neighbor relationship and authentication
  • 3.23 Troubleshoot network types, area types, and router types
    3.23.a  Point-to-point, multipoint, broadcast, nonbroadcast
    3.23.b  LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
    3.23.c  Internal router, backbone router, ABR, ASBR
    3.23.d  Virtual link
  • 3.24 Troubleshoot OSPF path preference
  • 3.25 Troubleshoot OSPF operations
  • 3.26 Troubleshoot OSPF for IPv6
  • 3.27 Troubleshoot BGP peer relationships and authentication
    3.27.a  Peer group
    3.27.b  Active, passive
    3.27.c  States and timers
  • 3.28 Troubleshoot eBGP
    3.28.a  eBGP
    3.28.b  4-byte AS number
    3.28.c  Private AS

    4.0 VPN Technologies
  • 4.1 Troubleshoot GRE

    5.0 Infrastructure Security
  • 5.1 Troubleshoot IOS AAA using local database
  • 5.2 Troubleshoot device access control
    5.2.a    Lines (VTY, AUX, console)
    5.2.b    Management plane protection
    5.2.c    Password encryption
  • 5.3 Troubleshoot router security features
    5.3.a    IPv4 access control lists (standard, extended, time-based)
    5.3.b    IPv6 traffic filter
    5.3.c    Unicast reverse path forwarding

    6.0 Infrastructure Services
  • 6.1 Troubleshoot device management
    6.1.a    Console and VTY
    6.1.b    Telnet, HTTP, HTTPS, SSH, SCP
    6.1.c    FTP6.2 Troubleshoot SNMP
    6.2.a    v2
    6.2.b    v3
  • 6.3 Troubleshoot logging
    6.3.a    Local logging, syslog, debugs, conditional debugs
    6.3.b    Timestamps
  • 6.4 Troubleshoot Network Time Protocol(NTP)
    6.4.a    NTP master, client, version 3, version 4
    6.4.b    NTP authentication
  • 6.5 Troubleshoot IPv4 and IPv6 DHCP
    6.5.a    DHCP client, IOS DHCP server, DHCP relay
    6.5.b    DHCP options (describe)
  • 6.6 Troubleshoot IPv4 Network Address Translation (NAT)
    6.6.a   Static NAT, Dynamic NAT, PAT
  • 6.7 Troubleshoot SLA architecture
  • 6.8 Troubleshoot tracking objects
    6.8.a   Tracking objects
    6.8.b   Tracking different entities (for example, interfaces, IPSLA results)
 

Overview

The training module of CCNP Routing and Switching Certification course imparts the relevant, practical and industry-ready domain knowledge on various networking solutions. It is generally an intermediate-level certification course required by network or system administrators. On completion of this, the students can possess the capability of designing, applying, authenticating and troubleshooting the wide area and local networks. Your work doesn't stop here. You also become proficient of fixing and figuring out the problems. Those who complete the certification course can find the jobs in sectors like – Financial Services, Information Technology, Telecommunication, IT Consulting, Network, and Communication services.
Rexton IT Solutions is giving the great opportunities to the students and professionals who want to make their future in CCNP Routing and Switching programs.


Course Track
Regular Track Fast Track Super Fast Track
90 Days 45 Days 30 Days

Benefits

CCNP Routing and Switching certification course are designed for boosting up the credibility and marketability of a person to improve the prospects of getting the job. The training provides practical, relevant and job-related skills to get places in the top counted organization. It brings a plethora of options with it. Some of them are mentioned as:

  • Put the foundation stone for a great career.
  • Expect the great paycheck
  • Bring respect in the workplace.
  • Trained by the experts who are proficient in their field.
  • Build a capability to solve the networking problems.
  • Easy access to the labs to practice the verbal knowledge.
  • Get participated in the question and answer the quiz.
  • Enhance the chances of getting a job in top class MNCs.

review

I believe in truth so I'm sharing my feeling with you. When i joined Rexton I was nothing means I was confuse that what I'll do in future, My IT career was almost finish because of Bad knowledge. But here I got the way and knowledge. I completed MCSE, CCNA, VM Ware, and AWS. Facilities is awesome they tech me and give me full time they support me a lot.
So I can Say, Rexton Is a place where you can achieve your Goals.
-Gaurav [03 Feb 2017]

I came to REXTON IT Solutions for CCNP training. The trainer has excellent skills during practical session and he explained every topic from basics, infrastructure is fully equipped with very good devices and they have in-house practice lab that offers a comfortable environment to read. Thanks to REXTON management and staff.

-Siddhant [10 Jan 2017]

What's Included

REXTON Includes Course Materials for Trainees-
  • Course Handbook
  • Examination vouchers
  • 24X7 LAB access
  • Course completion certificate by REXTON IT Solutions

Prerequisites

Participant Prerequisites:-
This CCNP Routing & Switching [300-301, 300-115, 300-135] Training requires that Professionals & Students meet the following prerequisites:-
  • Participants must have a valid CCNA Routing & Switching OR have equivalent knowledge.
 
 
Certification Prerequisites:- Valid Cisco CCNA Routing and Switching certification or any Cisco CCIE certification can act as a prerequisite.
CCNP Routing & Switching certification validates your skills as per Cisco Technology and can help differentiate between you and others while finding a job, also can boost your career with an excellent growth rate. 80% of IT managers believe that certifications are important for team performance & individuals.
 
Our Instructor is a technical International industry expert who meets ongoing certification requirements.

Enquiry

ccna training institute in noida

Student Review

Our Client

linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida linux training in noida