Event Detail

Welcome To Educskill

Best CCNA Routing and Switching Training Institute in Noida

CCNA Routing And Switching
Best CCNA Routing and Switching Training Institute in Noida & Delhi
CCNA R&S Training Institute In Noida: Best CCNA R&S training courses classes deliver by Rexton in Noida & Delhi. Rexton in noida has excellent and advanced training programs that will give you better performance & hands on experience. Our industry’s expert trainers offer a wide range of skills and experience in their graded areas. The Training center environment is too good for professional, individual, corporate, live project training and industrial training. Labs infrastructure is advanced, well managed and you can access LAB 24X7 from anywhere. Training center has international expert trainers and they have excellent knowledge, real time industry experience. Our Training programs combine with several innovative learning methods and delivery models. We understand your requirement and it will give you 100 percent growth for your career and provide the cost effective training programs and also work with flexibility for the trainees.
We have more than 500+ registered companies and well 10000+ placed students & professionals they are actively doing work for MNC. Once you complete the certification training successfully, Rexton place you in the top most IT companies that offer attractive salary and appealing career exposure.
Read More



Cisco Certified Network Associate [Exam 200-125]

1.0 Network Fundamentals

  • 1.1 Compare and contrast OSI and TCP/IP models
  • 1.2 Compare and contrast TCP and UDP protocols
  • 1.3 Describe the impact of infrastructure components in an enterprise network
    1.3.a Firewalls
    1.3.b Access points
    1.3.c Wireless controllers
  • 1.4 Describe the effects of cloud resources on enterprise network architecture
    1.4.a Traffic path to internal and external cloud services
    1.4.b Virtual services
    1.4.c Basic virtual network infrastructure
  • 1.5 Compare and contrast collapsed core and three-tier architectures
  • 1.6 Compare and contrast network topologies
    1.6.a Star
    1.6.b Mesh
    1.6.c Hybrid
  • 1.7 Select the appropriate cabling type based on implementation requirements
  • 1.8 Apply troubleshooting methodologies to resolve problems
    1.8.a Perform and document fault isolation
    1.8.b Resolve or escalate
    1.8.c Verify and monitor resolution
  • 1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting
  • 1.10 Compare and contrast IPv4 address types
    1.10.a Unicast
    1.10.b Broadcast
    1.10.c Multicast
  • 1.11 Describe the need for private IPv4 addressing
  • 1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
  • 1.13 Configure, verify, and troubleshoot IPv6 addressing
  • 1.14 Configure and verify IPv6 Stateless Address Auto Configuration
  • 1.15 Compare and contrast IPv6 address types
    1.15.a Global unicast
    1.15.b Unique local
    1.15.c Link local
    1.15.d Multicast
    1.15.e Modified EUI 64
    1.15.f Autoconfiguration
    1.15.g Anycast


2.0 LAN Switching Technologies

  • 2.1 Describe and verify switching concepts
    2.1.a MAC learning and aging
    2.1.b Frame switching
    2.1.c Frame flooding
    2.1.d MAC address table
  • 2.2 Interpret Ethernet frame format
  • 2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
  • 2.4 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
    2.4.a Access ports (data and voice)
    2.4.b Default VLAN
    2.5 Configure, verify, and troubleshoot interswitch connectivity
    2.5.a Trunk ports
    2.5.b Add and remove VLANs on a trunk
    2.5.c DTP, VTP (v1&v2), and 802.1Q
    2.5.d Native VLAN
  • 2.6 Configure, verify, and troubleshoot STP protocols
    2.6.a STP mode (PVST+ and RPVST+)
    2.6.b STP root bridge selection
  • 2.7 Configure, verify and troubleshoot STP related optional features
    2.7.a PortFast
    2.7.b BPDU guard
  • 2.8 Configure and verify Layer 2 protocols
    2.8.a Cisco Discovery Protocol
    2.8.b LLDP
  • 2.9 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
    2.9.a Static
    2.9.b PAGP
    2.9.c LACP
  • 2.10 Describe the benefits of switch stacking and chassis aggregation


3.0 Routing Technologies

  • 3.1 Describe the routing concepts
    3.1.a Packet handling along the path through a network
    3.1.b Forwarding decision based on route lookup
    3.1.c Frame rewrite
  • 3.2 Interpret the components of a routing table
    3.2.a Prefix
    3.2.b Network mask
    3.2.c Next hop
    3.2.d Routing protocol code
    3.2.e Administrative distance
    3.2.f Metric
    3.2.g Gateway of last resort
  • 3.3 Describe how a routing table is populated by different routing information sources
    3.3.a Admin distance
  • 3.4 Configure, verify, and troubleshoot inter-VLAN routing
    3.4.a Router on a stick
    3.4.b SVI
  • 3.5 Compare and contrast static routing and dynamic routing
  • 3.6 Compare and contrast distance vector and link state routing protocols
  • 3.7 Compare and contrast interior and exterior routing protocols
  • 3.8 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
    3.8.a Default route
    3.8.b Network route
    3.8.c Host route
    3.8.d Floating static
  • 3.9 Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
  • 3.10 Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
  • 3.11 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
  • 3.12 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)
  • 3.13 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)
  • 3.14 Troubleshoot basic Layer 3 end-to-end connectivity issues


4.0 WAN Technologies

  • 4.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
  • 4.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
  • 4.3 Configure, verify, and troubleshoot GRE tunnel connectivity
  • 4.4 Describe WAN topology options
    4.4.a Point-to-point
    4.4.b Hub and spoke
    4.4.c Full mesh
    4.4.d Single vs dual-homed
  • 4.5 Describe WAN access connectivity options
    4.5.a MPLS
    4.5.b Metro Ethernet
    4.5.c Broadband PPPoE
    4.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)
  • 4.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
  • 4.7 Describe basic QoS concepts
  • 4.7.a Marking
    4.7.b Device trust
    4.7.c Prioritization
    4.7.c. [i] Voice
    4.7.c. [ii] Video
    4.7.c. [iii] Data
    4.7.d Shaping
    4.7.e Policing
    4.7.f Congestion management


5.0 Infrastructure Services

  • 5.1 Describe DNS lookup operation
  • 5.2 Troubleshoot client connectivity issues involving DNS
  • 5.3 Configure and verify DHCP on a router (excluding static reservations)
    5.3.a Server
    5.3.b Relay
    5.3.c Client
    5.3.d TFTP, DNS, and gateway options
  • 5.4 Troubleshoot client- and router-based DHCP connectivity issues
  • 5.5 Configure, verify, and troubleshoot basic HSRP
    5.5.a Priority
    5.5.b Preemption
    5.5.c Version
  • 5.6 Configure, verify, and troubleshoot inside source NAT
    5.6.a Static
    5.6.b Pool
    5.6.c PAT
  • 5.7 Configure and verify NTP operating in a client/server mode


6.0 Infrastructure Security

  • 6.1 Configure, verify, and troubleshoot port security
    6.1.a Static
    6.1.b Dynamic
    6.1.c Sticky
    6.1.d Max MAC addresses
    6.1.e Violation actions
    6.1.f Err-disable recovery
  • 6.2 Describe common access layer threat mitigation techniques
    6.2.a 802.1x
    6.2.b DHCP snooping
    6.2.c Nondefault native VLAN
    6.3 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
    6.3.a Standard
    6.3.b Extended
    6.3.c Named
  • 6.4 Verify ACLs using the APIC-EM Path Trace ACL analysis tool
  • 6.5 Configure, verify, and troubleshoot basic device hardening
    6.5.a Local authentication
    6.5.b Secure password
    6.5.c Access to device
    6.5.c. [i] Source address
    6.5.c. [ii] Telnet/SSH
    6.5.d Login banner
  • 6.6 Describe device security using AAA with TACACS+ and RADIUS


7.0 Infrastructure Management

  • 7.1 Configure and verify device-monitoring protocols
    7.1.a SNMPv2
    7.1.b SNMPv3
    7.1.c Syslog
  • 7.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
  • 7.3 Configure and verify device management
    7.3.a Backup and restore device configuration
    7.3.b Using Cisco Discovery Protocol or LLDP for device discovery
    7.3.c Licensing
    7.3.d Logging
    7.3.e Timezone
    7.3.f Loopback
  • 7.4 Configure and verify initial device configuration
  • 7.5 Perform device maintenance
    7.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
    7.5.b Password recovery and configuration register
    7.5.c File system management
  • 7.6 Use Cisco IOS tools to troubleshoot and resolve problems
    7.6.a Ping and traceroute with extended option
    7.6.b Terminal monitor
    7.6.c Log events
    7.6.d Local SPAN
  • 7.7 Describe network programmability in enterprise network architecture
  • 7.7.a Function of a controller
    7.7.b Separation of control plane and data plane
    7.7.c Northbound and southbound APIs


“Cisco certified Network Associate” [CCNA 200-125] Routing and Switching is a certification program for entry-level network professional & Student that helps expand your investment in foundational networking knowledge. The course Training provides the knowledge and skills needed to install, configure, operate, and troubleshoot a small enterprise network. Key topics include Qos elements, virtualized and cloud services, along with controller types and tools that are available to support software defined network architectures. The CCNA Routing and Switching certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks.

When a Candidate completed CCNA Certification Training, he would be recognized as a Network Administrator, Network engineer, or System administrator. Candidate can troubleshoot network problems and can set up the Network infrastructure.


I believe in truth so I'm sharing my feeling with you. When i joined Rexton I was nothing means I was confuse that what I'll do in future, My IT career was almost finish because of Bad knowledge. But here I got the way and knowledge. I completed MCSE, CCNA, VM Ware, and AWS. Facilities is awesome they tech me and give me full time they support me a lot.
So I can Say, Rexton Is a place where you can achieve your Goals.
Gaurav [03 Feb 2017]

I came to REXTON IT Solutions for CCNP training. The trainer has excellent skills during practical session and he explained every topic from basics, infrastructure is fully equipped with very good devices and they have in-house practice lab that offers a comfortable environment to read. Thanks to REXTON management and staff.

Siddhant [10 Jan 2017]



REXTON IT Solutions provides you a world-class learning experience, whether you are a professional, looking for enhance your skills or a student, preparing for career in IT. 

  • Quality training delivered by certified Trainers & instructors of Cisco.
  • Course content written by industry experts.
  • Deliver one to one training & one to one instruction.
  • Certification preparation by using simulator.
  • 24X7 online Lab access, assistance and support.
  • Physical and virtual practice LABs using the latest and advanced equipment.
  • Hands on experience with Devices.
  • Question-answer sessions & interview preparation.